PET preforms
Injection-moulded from food-grade PET resin. Clear for water and drinks, tinted for oil, syrups and cleaners.
- Necks
- 25 · 28 (1810 / 1881) · 30/25 · 38 · 48 mm
- Weight
- 8.5 g to 95 g
- Colours
- Clear, blue, green, amber, custom
PET preform manufacturer · Bareilly, Uttar Pradesh
Preforms, caps & bottles, moulded in Bareilly round the clock.
From 9-gram water preforms to 90-gram preforms for 5-litre oil jars, with caps to match in any colour. One plant in Parsakhera Industrial Area, one call, loaded straight to your blowing line.
WhatsApp for today's rateReply in working hours, plant open 24×7
Call 98370 32935Talk to the plant directly
- 24×7plant open, all three shifts
- 4.1★on Google, 10 reviews
- 74ratings on Justdial, 4.0 average
Packaged drinking waterSoft drinksJuice & lassiEdible oil & gheeAyurvedic syrupsPhenyl & floor cleanersHand washPesticide & agro
What comes out of the plant
Three product lines, made to fit each other.
Preforms, the caps that seal them, and finished bottles. Order one or all three from the same dispatch.
Caps & closures
Screw caps with tamper-evident band, ribbed for grip. Coloured in-house with masterbatch to your brand shade.
- Sizes
- 25 · 28 · 38 · 48 mm
- Type
- Water, CSD with liner, flip-top
- Colours
- Any shade, matched to sample
Bottles & jars
Ready bottles for units that do not run their own blowing machine. White and clear, for pharma, cleaners and oil.
- Range
- 100 ml to 5 litre
- Finish
- Clear PET, opaque white
- Packing
- Poly bags in cartons
Preform finder
Tell us your bottle. We'll show the preform it needs.
Pick what you fill and the bottle size. The drawing changes to the real length of the preform, and the full requirement goes to the plant on WhatsApp.
Your requirement
- Neck finish
- 28 mm PCO 1810
- For bottle
- 500 ml · Drinking water
- Preform
- ≈ 107 mm long, before blowing
- Colour
- Clear
- Caps
- 28 mm water cap, tamper-evident · Yellow
- Quantity
- 1 – 5 lakh pcs / month
25 mm Alaska and 30/25 short necks also made on request.
Send this to the plantWeights are typical starting points. Final weight is set after a trial on your blowing machine.
Who we mould for
Six kinds of filling plants, one supplier.
Tap your industry to open the finder with the right neck and weight already picked.
From enquiry to your godown
How an order moves through the plant.
- Share your bottle
Send a photo of the bottle, its neck size and your blowing machine model. Or use the finder above.
- Trial preforms
We send a few preforms to blow on your machine, so the weight and neck fit before the bulk order.
- Moulding on shift
Your order runs on the injection line across three shifts. Weight is checked on the line every batch.
- Packed & loaded
Counted into poly-lined cartons or bags and loaded at Parsakhera on your truck or our transport.
Checked before it is packed
A preform is only good if it blows clean.
Haze, short shots and an oval neck all show up later on your line as rejected bottles. These are the checks every lot goes through before it leaves Parsakhera.
- ResinFood-grade virgin PET, dried before moulding so preforms stay clear
- WeightSampled from the line every batch, held within ±0.2 g
- NeckThread and support ring gauged with go / no-go fixtures
- LookChecked for haze, bubbles, black specks and gate stringing
- PackingCounted and sealed in poly-lined cartons to keep dust out
Inside the work
Resin in, sealed cartons out.
The person behind the plant
Shri Rakesh Agarwal, Director.
An engineering graduate (B.Tech), Rakesh Agarwal runs the Parsakhera plant that makes PET and HDPE bottles, containers and drums, from 50 ml up to 200 litres. Between Delhi and Lucknow, his is one of the most trusted names in plastic packaging.
He supplied bottles to the mustard-oil brand Bail Kolhu for 15 years, and today serves more than 800 clients. Small businesses know him as a supplier who stands by them, and he is associated, selflessly, with social organisations such as the Rotary Club.
- 15 yrs
- Bottle supply to Bail Kolhu
- 800+
- Clients served today
- 50 ml–200 L
- Bottles to drums
- B.Tech
- Engineering graduate
Visit or call the plant
Parsakhera Industrial Area, Road No. 2.
- Address
- D-25/3, Road No. 2, Parsakhera Industrial Area, Parsakhera, Bareilly, Uttar Pradesh 243502
- Landmark
- Near the Brindavan Beverages plant
- Phone
- +91 98370 32935
- Hours
- Plant open 24 hours, all days ·
Common questions
Before you place the first order.
What is the minimum order?
Trial lots for a new bottle are fine. For regular supply, tell us your monthly need and we plan it on the moulding schedule.
Can you make a different weight on the same neck?
Yes, within the range of the mould. For example, a 28 mm water preform can be run lighter or heavier by a few grams. A brand-new neck size needs a new mould, ask us first.
Will your caps fit my existing bottles?
Send one bottle or tell us the neck finish (1810, 1881, 30/25, 38 mm). We match caps to the finish, not just the size.
Do you supply outside Bareilly?
Yes. Orders are loaded at Parsakhera for units across Uttar Pradesh and nearby states, on your vehicle or a transporter we arrange.
Do you give a GST invoice?
Every dispatch goes with a GST invoice and e-way bill.